networkjunkie.wordpress.com
December | 2011 | Connect .. Disconnect .. Reconnect ..
https://networkjunkie.wordpress.com/2011/12
Connect . Disconnect . Reconnect . CCDA – DESGN (640-863). GNS3 Bug on C3745 IOS. December 28, 2011. Just speaking from my personal experience while working with this particular IOS. If you happen to know another way to make things work with this particular IOS version, I’d like to hear from you! CCDA – DESGN (640-863). CCIE R&S Lab v4.0 Blueprint. Blog – INE. Blog – IPExpert. Create a free website or blog at WordPress.com. Connect . Disconnect . Reconnect . Blog at WordPress.com.
networkjunkie.wordpress.com
June | 2012 | Connect .. Disconnect .. Reconnect ..
https://networkjunkie.wordpress.com/2012/06
Connect . Disconnect . Reconnect . CCDA – DESGN (640-863). CCIE R&S Lab v4.0 Blueprint. June 14, 2012. This checklist for all exam topics tested during the lab would probably be the most essential thing apart from the Doc CD to have handy at all times. The rule of thumb would ideally to be able to recite the technology, rough configuration steps, possible scenarios and troubleshooting without any trouble at all (Sounded like a tongue twister to me). CCIE Routing and Switching 4.0 (Blueprint).
noshut.blogspot.com
I like playing with routers: June 2011
http://noshut.blogspot.com/2011_06_01_archive.html
I like playing with routers. This blog is a collection of ideas and resources that I found while studying for my CCIE in Routing and Switching. While I have achieved that goal, I still intend to keep this blog going for wider network topics but updates may be sporadic. Wednesday, 1 June 2011. EIGRP Unequal Cost Paths. This post is going to be about how to perform unequal cost load balancing using EIGRP. There's going to be a little bit of mathematics here but nothing beyond some basic algebra. Network 10...
noshut.blogspot.com
I like playing with routers: April 2012
http://noshut.blogspot.com/2012_04_01_archive.html
I like playing with routers. This blog is a collection of ideas and resources that I found while studying for my CCIE in Routing and Switching. While I have achieved that goal, I still intend to keep this blog going for wider network topics but updates may be sporadic. Saturday, 28 April 2012. DHCP Snooping and IP Source Guard. This Blog posting will cover DHCP Snooping and IP Source Guard. The example topology will be using three routers and one switch as shown below:. Mac-address 0000.0000.0001. Mar 1 ...
noshut.blogspot.com
I like playing with routers: September 2011
http://noshut.blogspot.com/2011_09_01_archive.html
I like playing with routers. This blog is a collection of ideas and resources that I found while studying for my CCIE in Routing and Switching. While I have achieved that goal, I still intend to keep this blog going for wider network topics but updates may be sporadic. Tuesday, 27 September 2011. Interdomain Multicast using MSDP. This post is talking about using MSDP to join multicast domains together. The topology here is very simple even if it does consist of 6 routers. No ip domain lookup. Ip address ...
rizzitech.blogspot.com
Marco Rizzi Blog: Mini-Lab Challenge: 6 simple tasks
http://rizzitech.blogspot.com/2011/07/mini-lab-challenge-6-simple-tasks.html
Ιlιιlι. networking with passion. Saturday, July 23, 2011. Mini-Lab Challenge: 6 simple tasks. After an intense home-working week,. I decided to challenge my readers and the Project Avatar. Group "CCIE mini-lab challenges" members with a small lab:. The restrictions here are:. Don't use Policy based routing. Don't use static routes. 1- Configure interfaces and IGPs as per diagram. 2- Propagate a default route to R1 and R4 using summarization. 3- Configure R1 and R4 as stub. And if you lab it? R1#sh ip rou...
sohailpk.blogspot.com
Sohail Akhtar: December 2011
http://sohailpk.blogspot.com/2011_12_01_archive.html
Saturday, December 31, 2011. Enable the Hidden Administrator Account on Windows-7. 1 Go to Command Prompt. 2 c: net user administrator /active:yes. The command completed successfully. 3 The above line shows the successfull result. 4 Now you can use your Administrator account. I hope this will be informative for you. Links to this post. Sunday, December 25, 2011. I Hope this wil be informative for you! Links to this post. The SERDES Module on Subcard NP-3 1 is Failed. 2 Sub-card 1 is faulty. I hope this w...
sohailpk.blogspot.com
Sohail Akhtar: February 2012
http://sohailpk.blogspot.com/2012_02_01_archive.html
Wednesday, February 8, 2012. BFD Session status Changes to Down and Up. While working on DataCom Network (composed of hundreds of NE routers, configured with MPLS, IS-IS, QoS, MPLS-VPN, MPLS-TE, BGP and list goes on and on……! I saw this alarm “BFD Session status Changes to down” and “BFD Session status changes to up”. After doing some research, studying and help, I came to know about the root cause and main reason for this alarm. There can be different reason for alarm to appear:. Display bfd session all.
sohailpk.blogspot.com
Sohail Akhtar: April 2011
http://sohailpk.blogspot.com/2011_04_01_archive.html
Sunday, April 3, 2011. Make sure “ip cef” is running by using “show running” command. R2(config) # ip cef. R2(config) # mpls label protocol ldp. To make LDP router-id (using loopback address). R2(config) # mpls ldp router-id loopback 0. Perform these steps on R3 and R4? We will enable MPLS on those interface on which neighbor exists. R2(config) # interface serial 1/1. R2(config-if) # mpls ip. R3(config) # interface serial 1/0. R3(config-if) # mpls ip. R4(config) # interface serial 1/0. This was just a wi...
SOCIAL ENGAGEMENT