yuriystoys.com
November 2013 | Yuriy's Toys
http://www.yuriystoys.com/2013_11_01_archive.html
Android DRO Mini FAQ #2. Saturday, November 30, 2013. As the interest in the Android. Project grows, so does the number of questions I get each day. Some of those questions keep coming up regularly, and since it’s been almost a year since I posted the “ Android Digital Readout Micro FAQ. 8221;, it’s time to post another one. This post will not cover every question you might have, but hopefully it will address most of the common ones. Mixed Scale Controller Firmware Posted. Sunday, November 24, 2013.
yuriystoys.com
TouchDRO Project | Yuriy's Toys
http://www.yuriystoys.com/p/android-dro.html
TouchDRO Android App Info. TouchDRO is a wireless. Project aimed at creating an easy to build and flexible, yet powerful Digital Readout system that uses Android tablet as the main display and one of the inexpensive. The application is available absolutely free on Google Play store, and a scale controller can be build or purchased for as little as $30*. TIP: If you're contemplating putting together a DIY. But don't know where to start, take a look at the " Android DRO Step By Step Overview. Altough the a...
yuriystoys.com
TouchDRO Version 2 Now Available | Yuriy's Toys
http://www.yuriystoys.com/2014/11/touchdro-version-2-now-available.html
TouchDRO Version 2 Now Available. Sunday, November 9, 2014. The app can store up to six preference banks. This is one of the most fundamental changes to the application. In a nutshell it allows you to set up up to six different configurations and switch between them at will. This means that you can share the same tablet between up to six different machines, each with it's own configuration, even if the machines use scales with different resolution, or even a different number of scales. DRO In "Mill" Mode.
yuriystoys.com
November 2014 | Yuriy's Toys
http://www.yuriystoys.com/2014_11_01_archive.html
TouchDRO Version 2 Now Available. Sunday, November 9, 2014. This work by Yuriy Krushelnytskiy is licensed under a. Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
yuriystoys.com
September 2013 | Yuriy's Toys
http://www.yuriystoys.com/2013_09_01_archive.html
How To Upload Firmware to MSP430 Launchpad. Sunday, September 15, 2013. A few months ago I posted build instructions for a DRO controller that uses MSP430G2553 microcontroller with a TI MSP430 Value Line Launchpad. This work by Yuriy Krushelnytskiy is licensed under a. Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
yuriystoys.com
February 2014 | Yuriy's Toys
http://www.yuriystoys.com/2014_02_01_archive.html
Wednesday, February 19, 2014. TouchDRO is designed to work with a wide range of scales and machines, but it will not work right out of the box. After the application is installed, it needs to configured to match your particular setup. The process isn’t complicated and takes just a few minutes, though. I’ve received a fair number of complaints about the readout being inaccurate when the default counts-per-inch were used. These problem can be caused by several different issues. First of all,. Creative Comm...
yuriystoys.com
December 2013 | Yuriy's Toys
http://www.yuriystoys.com/2013_12_01_archive.html
New DRO for my Sieg X3 Mill Finished. Monday, December 23, 2013. Adding DRO to my Grizzly G0463 (Sieg X3 Mill). Sunday, December 8, 2013. Several people asked me to post pictures of my. Setup Today I started installing a new. Unit on my Grizzly G0463 (A.K.A. Grizzly Small Mill/Drill or Sieg X3) mill and decided to take advantage of this opportunity to take some pictures and post the progress. I’ve been itching to get a set of glass. Selecting Scales for a DRO. Friday, December 6, 2013. Performance. T...
yuriystoys.com
February 2015 | Yuriy's Toys
http://www.yuriystoys.com/2015_02_01_archive.html
Making Lathe Tachometer - Part 1. Friday, February 27, 2015. ER-40 Collet Chuck for JET 1024 Lathe. Monday, February 9, 2015. ER-40 Collet Chuck mounted on the lathe. This work by Yuriy Krushelnytskiy is licensed under a. Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
yuriystoys.com
July 2014 | Yuriy's Toys
http://www.yuriystoys.com/2014_07_01_archive.html
DIY Tachometer for Your Mill or Lathe. Sunday, July 27, 2014. Android DRO Step By Step Overview. Wednesday, July 23, 2014. Since I added a. To my mill I cant imagine how I lived without one for so long; it makes working on the mill so much easier and more efficie. Since youre reading this post, you are probably looking into building a. Up and running with links to more information where appropriate. This work by Yuriy Krushelnytskiy is licensed under a.
yuriystoys.com
January 2014 | Yuriy's Toys
http://www.yuriystoys.com/2014_01_01_archive.html
Beta Version of TouchDRO Now Available. Friday, January 31, 2014. Yesterday I published the first beta build of the TouchDRO application to the Google Play Store. This release includes a few major upgrades, such as tool library, tachometer, configurable user interface and preference banks. Tachometer output is pretty much self-explanatory; the other three need a bit more clarification. Battery Backup For DRO Interface. Friday, January 24, 2014. Saturday, January 18, 2014. Sunday, January 12, 2014. I hope...
