tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: Beam Blocks & Other Parts
http://tiki8m.blogspot.com/2010/10/beam-blocks-other-parts.html
Tiki 8m Wharram Catamaran. Wednesday, October 6, 2010. Beam Blocks and Other Parts. This is the floor of the compartment where the black water tank will be installed. The fwd compartments also get a floor . This creates flotation compartments below the floors at each end of the hull. We paint these areas with white elastomeric paint. This paint is tough and provides a good non-slip surface as well as not showing scratches. It is also easy to recoat in the future when required. We build our beam blocks ou...
tiki38construction.blogspot.com
TIKI 38 Construction & Infos: Ponçage.
http://tiki38construction.blogspot.com/2015/08/poncage-grrr.html
TIKI 38 Construction and Infos. La construction d'un catamaran de 11m60 de James Wharram et Hanneke Boon. Jeudi 6 août 2015. Publié par Olivier R. Inscription à : Publier les commentaires (Atom). Landgirl Afloat Musings of a 40 something who has changed her life. What is a Blog? Il y a 5 heures. Wharram Builders and Friends. Le site des Wharrams. Ian Bamsey posted a video. Il y a 8 heures. Construction d'un Tiki 38. Un style inimitable. Il y a 12 heures. Il y a 1 jour. Un Tiki à Rio. Il y a 6 jours.
tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: Beam Blocks and Cockpit
http://tiki8m.blogspot.com/2010/11/beam-blocks-and-cockpit.html
Tiki 8m Wharram Catamaran. Sunday, November 28, 2010. Beam Blocks and Cockpit. Here is the cockpit. This view is from the starboard side. We have changed the cockpit this time by making the seat "wings" removable. This will keep the width to 7' 6" and will facilitate easier storage in a shipping container. This owner plans to ship the boat to different locations with a dedicated container. The flanges that the seat wings will attach to are visible at each side of the cockpit. This blog will document step...
tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: April 2011
http://tiki8m.blogspot.com/2011_04_01_archive.html
Tiki 8m Wharram Catamaran. Sunday, April 17, 2011. Forward Deck.Tramp, Supports, Sheer Stripe, Mast Paint. This is the beam at the aft end of the cockpit. Th section in the center is where the swim ladder will attach. Visible at this end of beam is the slot that will receive the trampoline bolt rope.This is a piece of 1/2" PVC pipe that we glassed into the bottom corner of the beam and after fairing cut this slot. This technique has worked well for us on other projects. Subscribe to: Posts (Atom). Boatsm...
tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: Wharrram Tiki 8m #4 Close to Launch
http://tiki8m.blogspot.com/2011/07/wharrram-tiki-8m-4-close-to-launch.html
Tiki 8m Wharram Catamaran. Thursday, July 21, 2011. Wharrram Tiki 8m #4 Close to Launch. This boat has been back on the front burner for the last several weeks. We have moved forward a lot. The cockpit is almost finished. We have mounted all of the hardware and the engine and then we have potted for the fasteners. This prevents water from entering the laminate and prevents the bolts from crushing the core. This photo shows the cockpit before all of the hardware was installed. Looking very boat like.
tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: November 2010
http://tiki8m.blogspot.com/2010_11_01_archive.html
Tiki 8m Wharram Catamaran. Sunday, November 28, 2010. Beam Blocks and Cockpit. Here is the cockpit. This view is from the starboard side. We have changed the cockpit this time by making the seat "wings" removable. This will keep the width to 7' 6" and will facilitate easier storage in a shipping container. This owner plans to ship the boat to different locations with a dedicated container. The flanges that the seat wings will attach to are visible at each side of the cockpit. Subscribe to: Posts (Atom).
tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: August 2011
http://tiki8m.blogspot.com/2011_08_01_archive.html
Tiki 8m Wharram Catamaran. Monday, August 15, 2011. Really, Really, Almost Done. We loaded the Tiki 8m onto the trailer tonight. We have really been over the boat and everything is now rigged and operationaly checked. We built some carbon fiber tillers around some pvc pipe. We also worked on a new rudder shape for this boat. Here the rudders are rigged and pulled up. We used Dynex Dux for the rudder lashings. We have installed a 50 watt solar panel on each house top. Below is the nav station. Simple temp...
tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: August 2010
http://tiki8m.blogspot.com/2010_08_01_archive.html
Tiki 8m Wharram Catamaran. Saturday, August 28, 2010. This week we finished the second hull. The decks are actually more work than the hulls. Lots more pieces and corners. Here we have glued in some foam and some fairing putty between the beam block area.This makes for a cleaner surface when we glue down the core foam below. Below we have sanded the core foam and filleted the corners at the flange. Next we fit the foam into the sides and top of the main cabin . Here we are laminating on the inner skin.
tiki8m.blogspot.com
Tiki 8m Wharram Catamaran: October 2010
http://tiki8m.blogspot.com/2010_10_01_archive.html
Tiki 8m Wharram Catamaran. Wednesday, October 6, 2010. Beam Blocks and Other Parts. This is the floor of the compartment where the black water tank will be installed. The fwd compartments also get a floor . This creates flotation compartments below the floors at each end of the hull. We paint these areas with white elastomeric paint. This paint is tough and provides a good non-slip surface as well as not showing scratches. It is also easy to recoat in the future when required. We build our beam blocks ou...
SOCIAL ENGAGEMENT